Head Gear

(description coped from AVOX Systems official product sheet.) The AVOX Systems MBU-5/P crew oxygen mask (predecessor of the MBU-12/P) features an exterior hard shell with large edge radius and a silicone rubber face piece that remains soft and pliable at extremely high temperatures as well as at temperatures below -40°F. […]

The cold weather insulating helmet liner cap is worn alone or as a liner for the helmet assembly. The earflaps are fasten under or over chin, at back of neck, or are folded up around the top with the touch-and-close fasteners crisscrossed in the front. The cap is a fully […]

Stock Number Reference: Goggle, Ski Mountain Army Stock Number: 74-G-79

(Description copied from Technical Manual) The M48 mask protects the face, eyes, and respiratory system of the user from chemically, biologically, and radiologically toxic environments. Positive air pressure is supplied to the facepiece by the blower assembly. The incoming air is pulled through two filter canisters, which remove contaminants from […]

The Integrated Head Protection System (IHPS) consisting of a retention system, suspension system, helmet cover, maxillofacial protective system, hearing protection, and NVD bracket. The IHPS provides improved fragmentation, ballistic, and impact protection while reducing weight and improving fit over the Advanced Combat Helmet (ACH) and the Enhanced Combat Helmet (ECH). […]

Resuscitation tube for Mask, Chemical-Biological: Field, M17A1.   Stock Number Reference: Resuscitation Tube, for Chemical Biological Mask, M-1 NSN: 4240-00-930-2078 Assign Date: 1966-04-29

Stock Number Reference: Headnet, Insect FSN: 8415-261-6630 Assign Date: Unknown

The helmet sight assembly is a lightweight aluminum visor housing with a magnetic receptacle containing a reed switch attached near the top rear and a sight assembly attached to the front. The aluminum visor housing is precision attached to the SPH-4 helmet when the existing visor cover is removed. For […]

The M45 Chemical-Biological Mask System was fielded and adopted in 1996 in order to replace the M43 Type II and M24 Chemical-Biological Aircraft Masks, as well as to provide a modular mask platform for USSOCOM Ground Forces. Stemming from one-mask joint branch development experimentation in the early 1990’s, the M45 […]

Joint Service General Purpose Mask (JSGPM) History The Joint Service General Purpose Mask system is being developed to replace the M40/M42 series of masks, mask carrier and accessories for the U.S. Army, U.S. Marine Corps ground and combat vehicle operations and the MCU-2/P series of masks for the U.S. Air […]

HL1 Helmet Light (Description from official website) Go Head To Head With Darkness. The compact, variable-output HL1 HelmetLight features primary and secondary LEDs and one infrared Identify Friend or Foe (IFF) beacon. The primary LEDs are perfect for general-purpose close-work illumination. The colored secondary LEDs serve the same purpose but […]

Stock Number Reference: Net, Mosquito Hat FSN: 8415-264-0545 Assign Date: Unknown

The US Navy Diaphragm (ND) Mark IV Gas Mask was made in 1943-44 to replace the Mark III. The Mark III featured small oval-ish eye lenses, while the Mark IV features large semi-triangular eye lenses, providing more field of vision. The size of the Mark IV is “U” which means […]

Stock Number Reference: Spectacle, Industrial NSN: 4240-01-268-1734 Assign Date: 1987-11-24

Stock Number Reference: Components Item NSN Assign Date Helmet, Parachutist’s, Steel, Fastened w/Chin Strap w/Quick Release Snap Fastener 8470-00-161-9414 Unknown Liner, Parachutist’s Helmet 8470-00-753-5793 Unknown